- Pre-De-installation System Evaluation
- De-installations
- Rigging
- Transportation
- Storage
- Site Planning
- Installation
- System Calibration
- Applications Training
- System Warranty
Contact us with the details of your project.
|
Professional installation is critical for the performance and longevity of your system. We offer professional
and experienced handling of your project; from site planning to final on-site applications' training of your
technologists.
We offer turnkey projects to properly handle your expensive investment. Here are the details involving
services we offer:
-
System Evaluation: This is performed by an experienced engineer prior to the
de-installation of the system. A comprehensive site report detailing the performance of the system
in comparison to the OEM specification is produced to document the status of the system. This report
will also be used to initiate repairs required before the system is even considered for reinstallation.
-
De-installation: A professional team with all the right tools and test equipment will be
on site to start the de-installation. Working hand-in-hand with the sites' contractor to coordinate smooth
and safe de-cabling and removal of the equipment. System components are packed and packaged professionally
in preparation for transportation.
-
Rigging: Magnets and CT systems located on higher floors, in most cases, require the use
of experienced rigging services, the use of specialized cranes and/or large fork lifts is very common to locate
the system on the transporting truck.
-
Transportation: Right-on-time delivery is as critical as the use of the right air ride
transportation trucks. Equipment has to reach your destination very protected and on time.
-
Storage: In the event where the new site is not ready to receive the system, the
environmentally controlled storage facility becomes a necessity. Coldhead and chiller connections to
your magnet will ensure your magnet staying cold for the duration of storage. Magnet monitoring will
ensure helium boil off is within OEM specification during storage.
-
Site Planning: This service usually starts as early as the System Evaluation process. The
planning of the new site is very critical to the success of the project. Site blue prints will be produced from
your site's actual dimensions, and we are constantly in touch with the contractor at your site to monitor the
progress of the work in accordance to the architectural drawings.
-
Installation: Complete cabling and system power up, ramp and shim service for MRI
systems, perform system calibrations in accordance with OEM specification.
-
System Calibration: Complete system calibration per OEM specifications is performed by our
experienced engineers. Full calibrations including Magnet ramping and shimming, eddy currents compensation
and gradient calibrations for MRI.
-
Applications Training: We schedule an experienced CT or MRI technologist to train your
technologist(s) for 3-4 days after the system is completely calibrated.
-
System Warranty: You are ready to use your system and scan your patients. To give you
a peace of mind we offer you an optional maintenance agreement to help repair any problems you may encounter
with your system. Our maintenance agreements are designed to protect your investment and to limit your
financial risk.
We also offer RF Shielding services for you MRI systems..
- Professional and dedicated team.
- Turnkey project handling
from A - Zetta.
- Work with your deadlines
- Fixed rates and detailed billing.
Please contact us to request additional details about our services. Or visit
our Equipment Sales web page.
|
